Rug Making
Kits | Rug Hooking Patterns | Latch and Rug Hooks | Punch Needles | Rug Braiding | Rug Backing | Rug Hoops and Frames | Shirret Rug Making#16 - 1/2 " Rigby Cutter Head
#3 cutter head makes 5 strips 3/32 inch. Fingers are sold separately.
Item Number: 68650800
$33.00
Add
Available in the following variants:
#16 - 1/2" Rigby Finger Only
Finger for #1/2 - 1/2 cutter head. This keep the strips from wrapping around the cutter-head. One comes with the Model “H”, matching the size of the cutter. Additional cutters of different sizes need matching cleaning fingers.
Item Number: 6865050F
$12.00
Add
Available in the following variants:
Rigby Rag Cutter, B Extra Head
Single Blade Cutter head replacement for Model B.
Item Number: 6865001B
$33.00
Add
Rigby Rag Cutter, Model C Extra Head
Single Cutter head replacement for Model C.
Item Number: 6865001C
$33.00
Add
Rigby Rag Cutter, Model B for Braided Rugs
Just clamp a Rigby cutter to a table top and feed cloth into the cutter while you turn the crank. Perfect strips every time! The Model B, standard, single blade cutter head with guide arm cuts individual strips 1/2-2" wide for braiding and weaving.
Item Number: 6865000B
$208.00
Add
Rigby Rag Cutter, Model H - 1/4" head
Cutting fabric strips for hooking has never been so easy. Just clamp the Rigby cutter a table top and feed cloth into the cutter while you turn the crank. Perfect strips every time. Cut three, four or five strips at a time depending on the width of the strips desired. Comes with 1/4" head. Cutter heads also available are – 3³32", 1³8", 5³32", 3³16", 7³32" , whichever suits your needs. If you prefer the choice to put two different heads on the shaft to eliminate the need to change heads for different strip widths purchase the Model D. H is the same as Model D but with only one cutterhead.
Item Number: 6865000H
$237.00
Add
Rigby Rag Cutter, Model C with two heads
Clamp a Rigby cutter to a table top and feed cloth into the cutter while turning the crank. You'll get perfect strips every time! The Model C, with two heads on the same shaft can be used for either hooked or braided rug materials. The standard 1/4" multi-cut head (which can be changed to any of the six available sizes) is on one side for cutting narrow strips for hooking. The standard single blade cutter head with guide arm on the other side is for cutting single 1/2-2" strips for braiding and weaving. The most versatile model by far.
Item Number: 6865000D
$312.00
Add
Available in the following variants:
