Other Useful Weaving Tools
Halcyon Yarn started as a store for weavers, and our commitment to weavers is still evident in the large selection of weaving equipment we carry. If you need an item we don't carry let us know, we may be able to special order it for you. We are also happy to special order parts for any of the looms we stock. All prices subject to change without notice.
 | Paul Baines 24 in Weaving Stool - Cherry Note: also available in an 18" model for spinners! | View Cart | Check Out |
 | Paul Baines 24 in Weaving Stool - Maple
Note: also available in an 18" model for spinners! | View Cart | Check Out |
 | Weave, Draft & Calculation Records - Set of 10 $5.95 The colors worked so well in that jacket fabric... What yarn/sett did you use and what did you do to change the draft when you wove your Mother's favorite table runner? Find out in an instant! However you choose to file them these project record sheets can record the the information to do it again and to learn from the experience. Includes spots for the 4/8 shaft draft, tie up and treadling as well warp & weft calculations worksheet and a spot of honor for the sample. Item Number: 52000000 | View Cart | Check Out |
 |
Leclerc Holds-All $235.00 Place this "holds-all" near your loom to store all the multiple accessories and fibers. It is also designed to allow you to fasten a hand bobbin winder onto it, or use it as a doubling stand. It also contains a spool rack that holds up to 10 spools or bobbins. Made of Maple. Dimensions: Width: 34.5" Height: 31" Depth 11.5" Weight: 20 lb.. Item Number: 62638010 |
View Cart | Check Out |
 |
Winding Station $251.00 Schacht's sturdy winding station is designed to accomodate all your winding tools: ball winders, swifts and bobbin winders. Cone & spool rack for up to 8 cones or spools.Width 30 in, Height 32 in, Depth 18 in, Weight 17 lbs. Table top width 8 in. Extension arm for umbrella swift extends 19-22 in and can be at an angle. Counters and winders are not included. Item Number: 64050500 |
View Cart | Check Out |
 |
Wraps per Inch Tool $9.99 Warps per inch(WPI) measures the number of times that a yarn can be aligned in adjacent rows within 1 inch. This will determine the weight(thickness) of the yarn. Includes a WPI Knit-Kard. Item Number: 64890100 |
View Cart | Check Out |
 |
Double Fringe Twister $19.95 A handy gadget for all your fringing needs; rugs, scarves and afghans. Simply secure a few strands to each clamp and twist. When you have the desired amount of twist, carefully remove the clamps, let the yarns twist back on themselves and knot. Item Number: 68092000 |
View Cart | Check Out |
| Quadruple Fringe Twister $29.95 A handy gadget for all your fringing needs; rugs, scarves and afghans. Simply secure a few strands to each clamp and twist. When you have the desired amount of twist, carefully remove the clamps, let the yarns twist back on themselves and knot. Item Number: 68093000 |
View Cart | Check Out |
|
 |
Leclerc Fringe Twister, availale in double, triple, and quad models Priced by model (see drop down at right) A handy gadget for all your fringing needs; rugs, scarves and afghans. Simply secure a few strands to each clamp and twist. When you have the desired amount of twist, carefully remove the clamps, let the yarns twist back on themselves and knot. The Leclerc fringe twister is an economical alternative to the handcrafted fringe twister. Item Number: 61030x00 |
View Cart | Check Out |
 |
Magnifying Pick Glass with Rule $9.95 Item Number: 68040000 |
View Cart | Check Out |
 |
Sett Tool $9.95 Many weavers give a cold shoulder to the sampling process, warping their loom and crossing their fingers that everything will turn out just right. Next time, before throwing all caution to the wind, needle-weave a sample on the Sett Tool. Cut the two samples off the sett tool (one each-front and back), and you can keep one as is and wash the other to test for shrinkage or bleeding. The Sett Tool measures 3" overall and comes with a needle and directions. Item Number: 68090000 |
View Cart | Check Out |
 |
||
| Rigby Rag Cutter, Model B (variable width) $174.95 Just clamp a Rigby cutter to a table top and feed cloth into the cutter while you turn the crank. Perfect strips every time! Model B is a variable width cutter. It has an adjustable guide arm for setting the cutting width from 1/2" to 2". This cutter is recommended for rag rug weavers and braiders. Item Number: 6865000B |
View Cart | Check Out |
|
| Rigby Rag Cutter, Model C $249.95 The Model C has 2 cutters on the same shaft. A 1/4" head on one side for cutting narrow strips for hooking and a standard cutter head with guide arm on the other side for cutting 1/2-2" strips for braiding and weaving. Item Number: 6865000C |
View Cart | Check Out |
|
| Rigby Rag Cutter, Model D $249.95 This machine can be furnished with any 2 sizes of cutter desired. This is the most convenient machine offered to cut different widths of hooking strips. All of the eight regular widths are available for use with the D machine:3/32,1/8,5/32,3/16,7/32,1/4,3/8,and 1/2 inch. You will need to call us to specify the cutters desired. Item Number: 6865000D |
View Cart | Check Out |
|
| Rigby Rag Cutter, Model H $187.95 Cutting fabric strips has never been so easy. Just clamp the Rigby cutter a table top and feed cloth into the cutter while you turn the crank. Perfect strips every time. Cut three, four or five strips at a time depending on the width of the strips. The model H cutter comes standard with the 1/4" cutter head. Additional cutter heads in sizes 3/32", 1/8", 5/32", 3/16", and 7/32" are sold separately, see below. Item Number: 6865000H |
View Cart | Check Out |
|
| Rigby Cutter Heads for D or H $23.95 Specify strip width desired - 3/32" (3), 1/8" (4), 5/32" (5), 3/16" (6), 7/32" (7), or 1/4" (8). Cuts between 3-5 strips simultaneously. Item Number: 68650x00 |
View Cart | Check Out |
|
| Fingers for D or H (sizes 2-8) $8.95 Item 68650x0F |
View Cart | Check Out |
|
| Rigby Rag Cutter, Extra Head for Model B $23.95 Item Number: 6865001B |
View Cart | Check Out |
|
| Rigby Rag Cutter, C Extra Head - Author: $23.95 () Single Cutter head replacement for Model C. Item Number: 6865001c | View Cart | Check Out |
If you would like a printed copy of our complete equipment catalog and price list, please call us at 1-800-341-0282 (outside the U.S. and Canada, dial 1-207-442-7909), or use our order form to request one by mail. Don't forget to browse our book catalog for books and videos on every type of weaving, for every level of experience.
