Beka 9 yd Warping Board

Beka makes economical maple warping boards. The abutted joint corners are fastened with easy to assemble barrel nuts. Once assembled, these warping boards are easier to store under the bed than to disassemble.

Item Number: 71140000.
Price: $73.00/ea.

Qty: Checkout

Beka 4.5 yd Warping Board

Beka makes economical maple warping boards. The abutted joint corners are fastened with easy to assemble barrel nuts. Once assembled, these warping boards are easier to store under the bed than to disassemble.

Item Number: 71070000.
Price: $55.00/ea.

Qty: Checkout

Harrisville 12 yd Warping Board

The Harrisville 12 yard Warping Board Kit is made of solid hardwood and holds a full 12 yard warp and can accommodate two crosses. Each hardwood 3/4 peg is counter-pegged and glued to insure maximum stability and the corners are fitted together with double overlapping dado joints. It is easily disassembled, with the use of corner wing nuts, for more convenient storage when not in use. It is shipped as a complete kit with detailed instructions.

Item Number: 6612000W.
Price: $120.00/ea.

Qty: Checkout

Leclerc 6 1/2 yd Warping Board

Sturdy 6 1/2" warping board that can easily be taken apart for storage. May be used flat on a table or hung on the wall. Measures 22 3/4" X 20".

Item Number: 62680010.
Price: $91.00/ea.

Qty: Checkout

Leclerc 13 yd Warping Board

Sturdy warping board that can easily be taken apart for storage. may be used flat on a table or hung on the wall. Measures 22 3/4 in X 40 1/2 in.

Item Number: 62680020.
Price: $118.00/ea.

Qty: Checkout

Leclerc 21 yd Warping Board

This sturdily constructed warping board is easily knocked down for storage. It can be used flat on a table, or hung on a wall. For warp up to 21 yards long. Also available in 6 & 13 yd. board.

Item Number: 62634550.
Price: $144.50/ea.

Qty: Checkout

Norwood 18 yd Warping Board

The Norwood warping board is expertly crafted from kiln-dried Finnish birch. Smoothly finished front and back, and includes assembly hardware. Pegs are 1 yd from side to side.

Item Number: 6700000W.
Price: $89.00/ea.

Qty: Checkout

Schacht 4.5 yd Warp Board

Schacht warping boards, pictured above, are our favorite for durability and ease of use. They are crafted from hard maple and then sanded and oiled to a smooth finish. Double lap joints are fastened with wing-nuts making it easy to disassemble for storage. Long and sturdy pegs never come loose. 20x20x6

Item Number: 64620000.
Price: $75.00/ea.

Qty: Checkout

Schacht 14 yd Warp Board

Schacht warping boards are our favorites for durability and ease of use and storability. They are crafted from hard maple and then sanded and oiled to a smooth finish. Double lap joints are fastened with wing-nuts making it easy to disassemble for storage. 39x31x6

Item Number: 64610000.
Price: $116.00/ea.

Qty: Checkout

Leclerc Warping Pegs (pair)

Useful for warping small warps. Slides onto end of table or counter. Perfect for making kumihimo warps. For longer pegs (wider warps) try the Schacht Warping Pegs.

Item Number: 62340500.
Price: $19.00/ea.

Qty: Checkout

Schacht Warping Pegs

Short warps are easy to wind with Schacht's solid maple warping pegs. Just clamp the pegs to your table or countertop with ordinary C-clamps (not included). You choose the distance to set the pegs to get the warp length you need. The sturdy pegs are longer and thicker than the Leclerc. Perfect for making KumiHimo warps.

Item Number: 64650000.
Price: $21.00/ea.

Qty: Checkout

Harrisville 20 yd Warping Reel - vertical - With Brake Kit

Harrisville’s hardwood warping reel allows you to wind longer warps faster and with less arm fatigue than with a warping board. The friction brake makes for easy chaining off. The reel has a 2 yard circumference and 30" of vertical winding space for warps up to 20 yards long. This is our most popular reel. Use on table top or floor. Folds for easy storage. Requires light sanding and oiling or other finish of your choice.

Item Number: 6600000W.
Price: $310.00/ea.

Qty: Checkout

Leclerc 20 yd Warping Reel - vertical

Leclerc 20 yard reel. Peg sets can be moved up and down to achieve different lengths of warp.

Item Number: 62340200.
Price: $262.00/ea.

Qty: Checkout

Leclerc 40 yd Warping Reel - vertical

Reels are the fastest way of making chained warps with a variation of threads and colors. The cross sections that hold the pegs may be adjusted up or down, depending on the warp length. When the mill is not in use, the cross sections and pegs can be removed so that the mill folds to occupy a very limited space. Vertical warping mill gives 4 yds per rotation and can wind up to 50 yds. 68" high, 59" wide.

Item Number: 62340400.
Price: $712.00/ea.

Qty: Checkout

Louet 20 yd Warping Reel and Yarn Blocker

What a neat multi-function device. You can mount up to six dowels at either reel end to maintain a cross when winding warps. The maximum warp length depends on the warp thickness and the total number of warp thread bundles. You can also use the reel for blocking and drying yarns, especially handspuns to ensure a consistent twist. If you plan to use handspun as a warp, reel the washed but still wet yarn onto the reel. Once dry, your warp is all set to go to the loom. This warping reel/yarn blocker has a circumference of 59 in and a base length of 33 in. It folds to 36 x 21 x 4.5 in. Unlacquered beech.

Item Number: 65900000.
Price: $430.00/ea.

Qty: Checkout

Schacht 20 Yd Vertical Reel

Warping mills are ideal for long warps.  Instead of going back and forth with your arm to measure threads as you do on a warping board, the warping mill goes around and around which is quicker and less tiring.  Schacht's warping mills come in two models: the vertical warping mill sits on a table, and the horizontal warping mill may be used either on a table or on the floor.  The two yard circumference will hold up to 18 yards of warp, and can be folded up for storage.

Item Number: 6464000M.
Price: $347.00/ea.

Qty: Checkout

Schacht 20 Yd Warping Reel - Horizontal

Warping mills are ideal for long warps.  Instead of going back and forth with your arm to measure threads as you do on a warping board, the warping mill goes around and around which is quicker and less tiring.  Our warping mills come in two models: the vertical warping mill sits on a table, and the horizontal warping mill may be used either on a table or on the floor.  Two yard circumference will hold up to 18 yards of warp, and can be folded up for storage.

Item Number: 6464000H.
Price: $371.00/ea.

Qty: Checkout

Harrisville 4-Peg Cone Holder

Harrisville's cone holder is the most economical, and it's convenient for small studios.

Item Number: 66040000.
Price: $26.00/ea.

Qty: Checkout

Leclerc 8-Peg Cone and Tube Holder

Thread guides mounted over the pegs on Leclerc’s 8 peg cone and tube holder help threads feed off smoothly. It is especially useful if you use a warping paddle as it will keep your cones from rolling everywhere and tangling. Base is 20 1/2" X 8". Pegs are narrower than the Harrisville and so will accommodate most standard tubes. Height is approx. 14"

Item Number: 62636110.
Price: $144.50/ea.

Qty: Checkout

Leclerc Doubling Stand

Leclerc's doubling stand is most often used for twisting two or three yarns together before weaving or knitting. To do three strands, place one cone on the floor, one on the first level and one on the second level. The stand can be mounted on a wall for greatest stability.

Item Number: 61030100.
Price: $67.50/ea.

Qty: Checkout

Leclerc Warping Paddle 6 epi

With the Leclerc paddle you can wind up to 20 threads at once onto your warping board or reel. The slot-and-eye design makes creating a cross as easy as lifting and lowering the paddle. An advantage of Leclerc’s paddle is its larger slots and eyes (6 per inch) which can easily handle thick and textured yarns.

Item Number: 61630000.
Price: $22.50/ea.

Qty: Checkout

Schacht Warping Paddle 8 epi

With a paddle you can wind up to 20 threads at once onto your warping board or reel. The slot-and-eye design makes creating a cross as easy as lifting and lowering the paddle. Schacht’s paddle with 8 spaces per inch and a smaller handle is another option.

Item Number: 64630000.
Price: $22.00/ea.

Qty: Checkout

Harrisville 22" Raddle

Make warping easier. When warping back to front, clamp or rubber band a raddle to your back beam. The raddle will spread the warp to its proper width while you wind it onto the beam. Harrisville's raddles are appropriate for small, light looms. Pegs space the warp at one inch intervals and the middle one is stained darker so you can easily center your warp. When winding your warp do counting in the same increments as epi and tie each bundle loosely at the cross so it's raddle position will be easy to arrange.

Item Number: 6622000R.
Price: $60.00/ea.

Qty: Checkout

Harrisville 36" Raddle

When warping back to front, clamp or rubber band a raddle to your back beam. The raddle spreads the warp to its proper width while you wind it onto the beam. Harrisville's raddles are appropriate for small, light looms. Pegs space the warp at one inch intervals and the middle one is stained darker so you can easily center your warp.

Item Number: 6636000R.
Price: $72.00/ea.

Qty: Checkout

Harrisville 40" Raddle

Simple hardwood raddle can be clamped to the back beam or the shuttle race (clamps not included). Alternatively use heavy rubber bands - hooking one end on a peg, drawing it around the beam and back up over the same peg. One inch spaces, wooden pegs (approx. 2 inches high). Center peg stained for easy centering.

Item Number: 6640000R.
Price: $88.00/ea.

Qty: Checkout

Harrisville 50" Raddle

When warping back to front, clamp or rubber band a raddle to your back beam. The raddle spreads the warp to its proper width while you wind it onto the beam. Harrisville's raddles are appropriate for small, light looms. Pegs space the warp at one inch intervals and the middle one is stained darker so you can easily center your warp.

Item Number: 6650000R.
Price: $120.00/ea.

Qty: Checkout

Loop Top Raddle 36" with 1" Spaces

When warping back to front, clamp or rubber band a raddle to your back beam. The raddle spreads the warp to exact width while you wind it onto the beam. Our loop top raddles have plated steel loops spaced at 1 in intervals. To close the raddle simply slide a dowel or lease stick through the loops. If loop plating becomes rough over time smooth with 000 steel wool.

Item Number: 61530000.
Price: $64.00/ea.

Qty: Checkout

Loop Top Raddle 45" with 1" Spaces

When warping back to front, clamp or rubber band a raddle to your back beam. The raddle spreads the warp to exact width while you wind it onto the beam. Our loop top raddles have plated steel loops spaced at 1 in intervals. To close the raddle simply slide a dowel or lease stick through the loops. If loop plating becomes rough over time smooth with 000 steel wool.

Item Number: 61540000.
Price: $68.00/ea.

Qty: Checkout

Loop Top Raddle 60" with 1" Spaces

When warping back to front, clamp or rubber band a raddle to your back beam. The raddle spreads the warp to exact width while you wind it onto the beam. Our loop top raddles have plated steel loops spaced at 1 in intervals. To close the raddle simply slide a dowel or lease stick through the loops. If loop plating becomes rough over time smooth with 000 steel wool.

Item Number: 61550000.
Price: $85.00/ea.

Qty: Checkout

Schacht 26" Raddle (no clamps)

Raddles help keep a warp spread even as it is wound onto the warp beam. The Schacht Raddles have built-in clamps and can be attached to either the loom's back beam or the shuttle race of the beater. The raddles come with plated pins inserted every inch and with holes drilled every half inch with enough extra pins included to produce half-inch spacing. The Baby Wolf and Mighty Wolf Raddles come with special mounting brackets for the Wolf loom diagonal beams, as well as clamps for square beams or shuttle races. The handy top prevents warps from jumping to another space during winding on. The center peg is darkened for easy centering.

Item Number: 6425250R.
Price: $75.00/ea.

Qty: Checkout

Schacht 40" Raddle

Raddles help keep a warp spread even as it is wound onto the warp beam. The Schacht Raddles have built-in clamps and can be attached to either the loom's back beam or the shuttle race of the beater. The raddles come with plated pins inserted every inch and with holes drilled every half inch with enough extra pins included to produce half-inch spacing. The Baby Wolf and Mighty Wolf Raddles come with special mounting brackets for the Wolf loom diagonal beams, as well as clamps for square beams or shuttle races. The handy top prevents warps from jumping to another space during winding on. The center peg is darkened for easy centering.

Item Number: 6425480R.
Price: $110.00/ea.

Qty: Checkout

Schacht 48" Raddle

Raddles help keep a warp spread even as it is wound onto the warp beam. The Schacht Raddles have built-in clamps and can be attached to either the loom's back beam or the shuttle race of the beater. The raddles come with plated pins inserted every inch and with holes drilled every half inch with enough extra pins included to produce half-inch spacing. The Baby Wolf and Mighty Wolf Raddles come with special mounting brackets for the Wolf loom diagonal beams, as well as clamps for square beams or shuttle races. The handy top prevents warps from jumping to another space during winding on. The center peg is darkened for easy centering.

Item Number: 64625850.
Price: $130.00/ea.

Qty: Checkout

Schacht 18" Wolf Pup Raddle

Raddles help keep a warp spread even as it is wound onto the warp beam. The Schacht Raddles have built-in clamps which adapt to the slanted back beam of the Wolf looms. It can be attached to either the looms back beam or the shuttle race of the beater as well. The raddles come with plated pins inserted every inch and with holes drilled every half inch with enough extra pins included to produce half-inch spacing. The Baby Wolf and Mighty Wolf Raddles come with special mounting brackets for the Wolf loom diagonal beams, as well as clamps for square beams or shuttle races. The center peg is darkened for easy centering.

Item Number: 6426001R.
Price: $99.00/ea.

Qty: Checkout

Schacht 25" Baby Wolf Raddle

Raddles help keep a warp spread even as it is wound onto the warp beam. The Schacht Raddles have built-in clamps which adapt to the slanted back beam of the Wolf looms. It can be attached to either the looms back beam or the shuttle race of the beater as well. The raddles come with plated pins inserted every inch and with holes drilled every half inch with enough extra pins included to produce half-inch spacing. The Baby Wolf and Mighty Wolf Raddles come with special mounting brackets for the Wolf loom diagonal beams, as well as clamps for square beams or shuttle races. The center peg is darkened for easy centering.

Item Number: 6425000R.
Price: $109.00/ea.

Qty: Checkout

Schacht 36" Mighty Wolf Raddle

Raddles help keep a warp spread even as it is wound onto the warp beam. The Schacht Raddles have built-in clamps which adapt to the slanted back beam of the Wolf looms. It can be attached to either the looms back beam or the shuttle race of the beater as well. The raddles come with plated pins inserted every inch and with holes drilled every half inch with enough extra pins included to produce half-inch spacing. The Baby Wolf and Mighty Wolf Raddles come with special mounting brackets for the Wolf loom diagonal beams, as well as clamps for square beams or shuttle races. The center peg is darkened for easy centering.

Item Number: 6426000R.
Price: $128.00/ea.

Qty: Checkout

Leclerc 15.75" Wood Lease Stick

Lease sticks are used to hold the warp cross. These easy to use on any model table loom up to 16 in in width. Usually used in pairs so purchase two.

Item Number: 62041610.
Price: $7.00/ea.

Qty: Checkout

Leclerc 24" Wood Lease Stick

Lease sticks are used to hold the warp cross. These easy to use on any model table loom up to 24 in in width. Usually used in pairs so purchase two.

Item Number: 62042410.
Price: $10.50/ea.

Qty: Checkout

Leclerc 24" Metal Lease Stick

Lease sticks are used to hold the warp cross. These easy to use on any model table loom up to 24 in in width. Usually used in pairs so purchase two.

Item Number: 62042400.
Price: $6.15/ea.

Qty: Checkout

Leclerc Flat Steel Brake Circle

After years of use the flat metal brake circle on your Leclerc loom may need replacing. Here's the part you need. Specify loom model for correct ordering.

Item Number: 62047010.
Price: $23.00/ea.

Qty: Checkout

Leclerc 22" Wood Lease Stick

Lease sticks are used to hold the warp cross. These easy to use on any model table loom up to 24 in in width. Usually used in pairs so purchase two.

Item Number: 62048220.
Price: $7.25/ea.

Qty: Checkout

Leclerc 27" Wood Lease Stick

Lease sticks are used to hold the warp cross. These can be used on any model loom up to 27 in in width. Usually used in pairs so purchase two.

Item Number: 62048270.
Price: $10.50/ea.

Qty: Checkout

Leclerc 36" Wood Lease Stick

Lease sticks are used to hold the warp cross. These can be used on any model loom up to 36 in in width. Usually used in pairs so purchase two.

Item Number: 62048360.
Price: $10.50/ea.

Qty: Checkout

Leclerc 45" Wood Lease Stick

Lease sticks are used to hold the warp cross. These can be used on any model loom up to 45 in in width. Usually used in pairs so purchase two.

Item Number: 62048450.
Price: $13.25/ea.

Qty: Checkout

Leclerc 60" Wood Lease Stick

Lease sticks are used to hold the warp cross. These can be used on any model loom up to 60 in in width. Usually used in pairs so purchase two.

Item Number: 62048600.
Price: $17.00/ea.

Qty: Checkout